异步电动机在不同运行条件下的热行为

FANTIDIS G. Jacob, KARAKOULIDIS Konstantinos
国际希腊大学

摘要

如今，电机出现在许多工业过程和作业中，涵盖各种机械设备并在关键工业应用中发挥着重要作用。红外
热成像是一种非侵入性、非破坏性的检查方法，已广泛应用于电气安装的各个领域。在这项研究中，利用红外热成
像以使用Jenoptik VarioCAM 7800红外摄像机测量1.1KW三相鼠笼式异步电动机在不同运行条件下的发热行为。在所
有情况下，检查电机的三个感兴趣的区域，滚珠轴承、框架和绕组。实验表明，绕组中的红外图像对异步电动机热
行为的预测精度最高。

关键词

红外热成像；异步电动机；绕组；热行为；相位故障

参考

[1] Picazo-Ródenas, M. J., et al. “A new methodology

forcomplementary diagnosis of induction motors based

oninfrared thermography”, International Journal on

EnergyConversion (IRECON) 3.2 (2015): pp. 44-52.

[2] López-Pérez, David, and Jose AntoninoDaviu,“Application of infrared thermography to failure

detectionin industrial induction motors: case stories”,

IEEETransactions on Industry Applications 53.3 (2017):

pp.1901-1908.

[ 3 ] J a d i n , M o h d S h a w a l , S o i b T a i b , a n d

Kamarul HawariGhazali. “Feature extraction and

classification fordetecting the thermal faults in electrical

installations”,Measurement 57 (2014): pp. 15-24.

[ 4 ] K h a m i s a n , N o r l i a n a , e t a l . “ H i s t o g r a m -

based of Healthyand Unhealthy Bearing Monitoring in

Induction Motor byUsing Thermal Camera”, Journal of

Telecommunication,Electronic and Computer Engineering

(JTEC) 10.1-9(2018): pp. 31-35.

[5] Kompella, KC Deekshit, Mannam Venu Gopala Rao,

andRayapudi Srinivasa Rao. “Bearing fault detection in a

3phase induction motor using stator current frequencyspectral

subtraction with various wavelet decompositiontechniques”,

Ain Shams Engineering Journal (2017).

[ 6 ] K a r v e l i s , P e t r o s , e t a l . “ A n a u t o m a t e d

thermographicimage segmentation method for induction motor

faultdiagnosis”, Industrial Electronics Society, IECON 2014-

40th Annual Conference of the IEEE. IEEE, 2014. pp.3396-

3402.

[7] Gonzalez-Cordoba, J. L., et al. “Methodology

foroverheating identification on induction motors undervoltage

unbalance conditions in industrial processes”,(2016). Journal

of Scientific & Industrial Research. 75,(2016), pp. 100-107.

[ 8 ] Y . L a i b D i t L e k s i r , M . M a n s o u r , A .

Moussaoui,“Localization of thermal anomalies in electrical

equipmentusing Infrared Thermography and support

vectormachine”, Infrared Physics & Technology 89 (2018):

pp.120-128.

[ 9 ] J a d i n , M o h d S h a w a l , S o i b T a i b , a n d

Kamarul HawariGhazali. “Feature extraction and

classification fordetecting the thermal faults in electrical

installations”,Measurement 57 (2014): 15-24.

[ 1 0 ] F a n t i d i s J . G . , “ T h e r m o g r a p h y i n a

DistributionOperator, Common Real Problems”, Archives of

Current

[11] Research International 14 (4) (2018): pp. 1-7.S.

Taib. “Application of infrared thermography forpredictive/

preventive maintenance of thermal defect inelectrical

equipment”, Applied Thermal Engineering 61.2(2013a):

220–227.

[12] Huda, A. S. N., and S. Taib. “Suitable features

selectionfor monitoring thermal condition of electrical

equipmentusing infrared thermography”, Infrared Physics

&Technology 61 (2013b): 184–191.

[13] Karakoulidis, K., J. G. Fantidis, and V. Kontakos.

“TheTemperature Measurement in a Three-Phase

PowerTransformer under Different Conditions”, Journal

ofEngineering Science & Technology Review 8.5 (2015).

[14] Zou Hui, Fuzhen Huang. “A novel intelligent

faultdiagnosis method for electrical equipment using

infraredthermography”, Infrared Physics & Technology 2015;

73:pp. 29-35.

[15] J. G. Fantidis, K. Karakoulidis and D. V.

Bandekas,“Thermography in a Distribution Operator,

Challenges ina Live Network: Case Study Central Greece

RegionalDepartment of HEDNO”, Journal of Electrical

andElectronics Engineering 11 (2018), pp. 11-16.

[16] M. Manana, A. Arroyo, A. Ortiz, C.J. Renedo,

S. Perez,F. Delgado, “Field winding fault diagnosis in DC

motorsduring manufacturing using thermal monitoring”,

AppliedThermal Engineering, vol. 31, no.5, (2011) pp. 978-983.

[17] P. Gill, “Electrical Power Equipment Maintenance

andTesting”, Second Edition, CRC Press, Taylor &

FrancisGroup, U.S., 2009.

[18] A.R. Mohanty, S. Fatima, “Shaft misalignment

detectionby thermal imaging of support bearings”, IFAC

PapersOnLine, vol. 48, no. 21 2015, pp. 554-559.

[19] Armando Guadalupe Garcia-Ramirez, Luis

AlbertoMoralesHernandez, Roque Alfredo OsornioRios, JuanPrimo Benitez-Rangel, Arturo GarciaPerez, Rene de JesusRomero-Troncoso, “Fault detection

in induction motorsand the impact on the kinematic

chain throughthermographic analysis”, Electric Power

SystemsResearch, Vol. 114, Sep. 2014, pp. 1-9.

[20] Fantidis J. G., Karakoulidis K., Lazidis G., Potolias

C.,Bandekas D. V., “The study of the thermal profile of athreephase motor under different conditions”, ARPNJournal of

Engineering and Applied Sciences, 8 (11):(2013) pp. 892–

899.

[21] Fantidis J. G., D. V. Bandekas, K. Karakoulidis,

G.Lazidis, C. Potolias. “The temperature measurement

of thewindings in a three-phase electrical motor under

differentconditions”, Gazi University Journal of Science Part A:

Engineering and Innovation 3.2 (2015): pp. 39-44.