混凝土3D打印技术的加固策略和耐久性特征:系统评价
摘要
是该行业的一个新时期,因为它有可能颠覆传统的建筑实践。本文讨论了用于提高混凝土 3D打印结构性能和其耐久
性性能的加固方法。此外,本文确定了混凝土 3D打印技术的未来研究需求。
关键词
全文:
PDF参考
[1]Van den Heever, M.; Bester, F.; Pourbehi, M.; Kruger,
J.; Cho, S.; van Zijl, G. Characterizing the Fissility of 3D
Concrete Printed Elements via the Cohesive Zone Method. In
Proceedings of the Second RILEM International Conference on
Concrete and Digital Fabrication, Eindhoven, The Netherlands,
6–9 July 2020; Springer: Cham, Switzerland, 2020; pp. 489–
499.
[2]Kinomura, K.; Murata, S.; Yamamoto, Y.; Obi, H.;
Hata, A. Application of 3D Printed Segments Designed
by Topology Optimiza- tion Analysis to a Practical Scale
Prestressed Pedestrian Bridge. In Proceedings of the Second
RILEM International Conference on Concrete and Digital
Fabrication, Eindhoven, The Netherlands, 6–9 July 2020;
Springer: Cham, Switzerland, 2020; pp. 658–668.
[3]Le, T.T.; Austin, S.A.; Lim, S.; Buswell, R.A.; Law,
R.; Gibb, A.G.F.; Thorpe, T. Hardened properties of highperformance printing concrete. Cem. Concr. Res. 2012, 42,
558–566.
[4]Albar, A.; Chougan, M.; Al- Kheetan, M.J.; Swash,
M.R.; Ghaffar, S.H. Effective extrusion-based 3D printing
system design for cementitious-based materials. Results Eng.
2020, 6, 100135.
[5]Arunothayan, A.R.; Nematollahi, B.; Ranade, R.; Bong,
S.H.; Sanjayan, J. Development of 3D-printable ultra-high
performance fiber-reinforced concrete for digital construction.
Constr. Build. Mater. 2020, 257, 119546.
[6]Yu, J.; Leung, C.K. Impact of 3D printing direction
on mechanical performance of strain-hardening cementitious
composite (SHCC). In Proceedings of the RILEM International
Conference on Concrete and Digital Fabrication, Zurich,
Switzerland, 9–12 September 2018; pp. 255–265.
[7]Bos, F.; Bosco, E.; Salet, T. Ductility of 3D printed
concrete reinforced with short straight steel fibers. Virtual
Phys. Prototyp. 2019,14, 160–174.
[8]Ding, T.; Xiao, J.; Zou, S.; Zhou, X. Anisotropic
behavior in bending of 3D printed concrete reinforced with
fibers. Compos. Struct.2020, 254, 112808.
[9]Arunothayan, A.R.; Nematollahi, B.; Ranade, R.; Bong,
S.H.; Sanjayan, J.G.; Khayat, K.H. Fiber orientation effects on
ultra-high performance concrete formed by 3D printing. Cem.
Concr. Res. 2021, 143, 106384.
[10]Gaudillière, N.; Duballet, R.; Bouyssou, C.;
Mallet, A.; Roux, P.; Zakeri, M.; Dirrenberger, J. Large-Scale
Additive Manufacturing of Ultra-High-Performance Concrete
of Integrated Formwork for Truss-Shaped Pillars; Springer:
Cham, Switzerland, 2019; pp. 459–472.
[11]Zhu, Y.; Wen, C.K.; Xu, G.D.; Liu, D.; Chen, J. The
Preparation and Performance of the Cement-Based Concrete
3D Printing Materials. Mater. Sci. Forum 2018, 932, 131–
135.
DOI: http://dx.doi.org/10.12361/2661-3824-04-02-63
Refbacks
- 当前没有refback。