利用设备综合效率（OEE）法分析清洁水分配器的有效 性

Abdul Mail, Muhammad Dahlan, Nurhayati Rauf, A. Nurul Chairany, Arfandi Ahmad, Khhairunnisa Jufri

摘要

清洁水分配器对于当地饮用水公司向客户提供清洁水是非常重要的。对水的需求持续增加，所以需要分析确
定生产过程中发动机泵性能下降的原因，进行维护活动以保持机器的可靠性，使其能够正常运行。因此，需要一个好
的策略来保持生产过程的连续性。本研究的目的是测量与清洁水生产水平低下有关的配水泵机器/设备的性能，以确定
该公司遭受的损失。2019 年 11 月，Lapi I 在进行维修前的设备综合效率（OEE）值为 69.38%，Lapi II 为 69.75%，而 2019
年 12 月 Lapi I 为 74.02%，Lapi II 为 73.65%，仍然低于 JIPM 标准，即≥85%。从六大损失的结果来看，清洁水分配泵机
整体仍需要评估，以便提高有效性和生产率，特别是在降速损失的问题上，提出改进清洁水分配器的建议。2020 年 1
月维修后，Lapi I 为 87.90%，Lapi II 为 87.26%，而 2020 年 2 月 Lapi I 为 90.34%，Lapi II 为 85.81%。

关键词

维护；设备综合效率（OEE）；六大损失

参考

[1] Winarno, H., & Ferdiansyah, F. (2018). ANALYSIS OF THE EFFECTIVENESS OF THE MILL

ROUGHING MACHINE. 3 (2), 67–78. [2] Nur, M., & Haris, H. (2019). Proposed Machine

Effectiveness Improvement Through TPM

Implementation Analysis Using OEE Method And Six

Big Losses at PT. P&P Bangkinang. 8 (1), 57–67. [3] Mulyati, D., Sentia, PD, & A, IZ (2017). Analysis of Clean Water Distribution Machine

Maintenance Using the Overall Equipment Effectiveness

(OEE) Method at PDAM Lambaro Unit. II (4), 176–181. [4] Febriyanti, D., & Fatma, E. (2018). Production

Machine Effectiveness Analysis Using Failure Approach

and Mode Effect Analysis and Logic Tree Analysis

Production Machine Effectiveness Analysis Using Failure

and Mode Effect Analysis and Logic Tree Analysis. 39–47.[5] Prabowo, RF, South, JM, West, J., & Hariyono, H. (2020). Total Productive Maintenance (TPM) in

Grinding Machine Maintenance Using the Overall

Equipment Effectiveness (OEE) Method. 5 (2). [6] Energy, J., Teknologi, DAN, Jetm, M., Rezza, M., Utomo, W., B, HA, & K, MN (2018). PUMP 107

MAINTENANCE PLANNING USING RELIABILITY

CENTERED MAINTENANCE (RCM) METHOD IN PT. PETROCHEMICAL GRESIK. 01 (02). [7] Anggraini, M., Khikmawati, E., & Widiastuti, H. (2017).PRESS MACHINE PRODUCTIVITY

ANALYSIS USING PADAPT OVERALL

EQUIPMENT EFFECTIVENESS (OEE) APPROACH. JAPFA COMFEED INDONESIA LAMPUNG.1, 132–138. [8] Anthony,MB (2019). Analysis of the Application

of Total Productive Maintenance (TPM) Using Overall

Equipment Effectiveness (OEE) and Six Big Losses on

the Cold Leveler Machine PT. KPS. 2 (2), 94–103. [9] Industry et al., (2019) Industry, PT, Teknik, F., Science, D., West, T., South, J., & Effectiveness, OE

(2019). BOOBTS ON PACKAGING BOX MAKING. 2–3. [10] Jannah, RM, & Nalhadi, SA (2017). Analysis of

the Effectiveness of a Centrifugal Machine Using the

Ovall Equipment Effectiveness (OEE) Method. (2013). [11] Kameiswara, RA, Sulistyo, AB, & Gunawan, W. (2018). OVERALL EQUIPMENT EFFECTIVENESS

(OEE) ANALYSIS IN REDUCING SIX BIG LOSSES

IN COOLING PUMP BLOWER PLANT PT. INTEGRATED STEEL FACTORY. 1 (1), 67–78. [12] Management, I. (2016). Analysis of Overall

Equipment Effectiveness (OEE) in Minimizing Six Big

Losses on Production Machines at UD. New life. 5 (2), 52–57. [13] Sundana, S., Thoriq, M., & Qodri, A. (2019). Analysis of the causes of low OEE values on the Heading

Machine at PT DRA Component Persada. 5(1).